{"title":"Toyota Products","description":null,"products":[{"product_id":"performance-lower-control-arms-4","title":"Performance Lower Control Arms","description":"\u003cp\u003eDescription\u003cbr\u003e The Dirt King performance lower control arms were developed to withstand off road abuse and not compromise the vehicles on road driving characteristics. The most vulnerable suspension component on the Tacoma's are the lower control arms. The Dirt King control arms have additional ground clearance and include 1\/8\" aluminum skid plates for added protection. If there's any major contact the internal ribbed design keeps the crucial parts intact so you're not left stranded on the trail.\u003c\/p\u003e\u003cp\u003e The outer pivots on the lower control arms utilize heavy duty Moog ball joints which are low maintenance and easily serviceable. Controlled side by side testing was done between Moog ball joints and the industry standard 1\" uniball for the outer pivot. The result was better on road tracking with the Moog ball joints. Other benefits include a sealed housing to eliminate noise, longer life span, and readily available at auto part stores. \u003c\/p\u003e\u003cp\u003e Delrin bushings were chosen for the inner pivots after weighing all the pro and cons between vulcanized rubber bushings, poly bushings, and uniballs. Here are some of their major flaws; vulcanized bushings restrict the amount of articulation, poly bushings are too soft for the amount of force on the lower control arms causing premature wear and noise, uniballs quickly become contaminated with dirt making them noisy and they're also expensive to replace.\u003c\/p\u003e\u003cp\u003e Additional features on the Dirt King lower control arms include recessed shock mounting with a drain hole and accepts all types of shocks and struts. It also accommodates for bump stops and limit straps. Progressive steering stops limit the steering throughout the suspension cycle to allow for maximum steering without over articulating the CV's or tie rods. This product is a direct bolt on application with all necessary hardware included. The arms are coated with a durable black powder coat and all the wearable components are replaceable for a product that will last a lifetime. Check out this in depth review on the product: [Trail Tacoma]\u003c\/p\u003e\u003cp\u003e Specifications\u003cbr\u003e•\tTrack Width: Stock\u003cbr\u003e•\tMaximum Tire Size: 33”\u003cbr\u003e•\tMaximum Backspacing: 4.75”\u003cbr\u003e•\tMinimum Rim Size: 16”\u003cbr\u003e•\tCompatible with factory sway bar: Yes\u003cbr\u003e•\tBump Stop Size: 2.0 x 2.0\u003cbr\u003e•\tCoil Over Shock Size: OEM replacement coil overs\u003c\/p\u003e\u003cp\u003e What's Included\u003cbr\u003e•\tBoxed plate lower control arms\u003cbr\u003e•\t1\/8\" aluminum skid plate\u003cbr\u003e•\tDelrin bushings\u003cbr\u003e•\tGrease fittings\u003cbr\u003e•\tMoog ball joints\u003cbr\u003e•\tBrushed stainless steel logo plates\u003cbr\u003e•\tGrade 8 mounting hardware\u003cbr\u003e•\tZinc plated inner bushing sleeves\u003cbr\u003e•\tZinc plated bump stop spacers\u003cbr\u003e•\tDurable black powder coat finish\u003cbr\u003e•\tDirt King sticker pack\u003cbr\u003e•\tInstallation instructions\u003c\/p\u003e\u003cp\u003e  Features\u003cbr\u003e•\tCAD designed\u003cbr\u003e•\tSlanted front plate to deflect objects\u003cbr\u003e•\tInternally ribbed with extrusions for weight reduction\u003cbr\u003e•\tPreassembled for fast installation\u003cbr\u003e•\tGrease fitting ports for easy servicing\u003cbr\u003e•\tZinc plated components for corrosion resistance\u003cbr\u003e•\tBump stop plating\u003cbr\u003e•\tLimit strap tabbing\u003cbr\u003e•\tProfessionally MIG welded\u003cbr\u003e•\tProudly made in the USA\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183292720,"sku":"DK-811704","price":1812.02,"currency_code":"USD","in_stock":true}]},{"product_id":"bypass-shock-hoop-kit-3","title":"Bypass Shock Hoop Kit","description":"\u003cp\u003eThis product simplifies the installation process when adding bypass shocks to the Dirt King long travel kit. The key components of the shock hoops are prefabbed for ideal fitment. No measurements are required when installing this product with our spec bypasses, it just needs to be welded in place.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183325488,"sku":"DK-811710","price":538.02,"currency_code":"USD","in_stock":true}]},{"product_id":"bypass-shock-hoop-kit-4","title":"Bypass Shock Hoop Kit","description":"\u003cp\u003eThis product simplifies the installation process when adding bypass shocks to the Dirt King long travel kit. The key components of the shock hoops are prefabbed for ideal fitment. No measurements are required when installing this product with our spec bypasses, it just needs to be welded in place.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183358256,"sku":"DK-811710","price":538.02,"currency_code":"USD","in_stock":true}]},{"product_id":"plate-rear-bumper-4","title":"Plate Rear Bumper","description":"\u003cp\u003e Description\u003cbr\u003eThe Dirt King plate rear bumper for the Toyota Tacoma increases ground clearance and has a great appearance. The bumper works with factory bedsides or fiberglass bedsides. Once installed the bedsides will need to be cut at an angle to match the bumper's profile. Included with the bumper are two 3D printed trim pieces to fill in the void under the tail lights.\u003c\/p\u003e\u003cp\u003e Specifications\u003cbr\u003e•\tWorks with factory bedsides or fiberglass bedsides\u003cbr\u003e•\tRecessed license plate lights\u003cbr\u003e•\tDurable and lightweight design, 31lbs\u003cbr\u003e•\tThreaded license plate mounting holes\u003c\/p\u003e\u003cp\u003e What's Included\u003cbr\u003e•\tBumper\u003cbr\u003e•\tMounting hardware\u003cbr\u003e•\tLicense plate lights\u003cbr\u003e•\t3D printed weather \u0026amp; impact resistant trim pieces\u003c\/p\u003e\u003cp\u003e  Features\u003cbr\u003e•\tCAD designed \u003cbr\u003e•\t1\/8\" steel plate construction\u003cbr\u003e•\tProfessionally MIG welded\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183423792,"sku":"DK-811826","price":877.1,"currency_code":"USD","in_stock":true}]},{"product_id":"prefab-bedcage-3","title":"Prefab Bedcage","description":"\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003e Ships Via Frieght\u003c\/p\u003e\u003cp\u003eDescription\u003cbr\u003eThe Dirt King Prefab Bed Cage was developed after building numerous custom bed cages. With that experience we've perfected the design for maximum travel and easy installation. The bed cage takes up minimal bed space while not compromising strength. Accessory mounting holes are incorporated into the center section of the cage to mount dust lights and flag whips. The entire kit bolts together and installs in the factory bed mounting locations. It is designed to be installed with Deaver leaf under springs. This suspension system is superior to a cantilever suspension system for two major reasons. The first reason is the shock mounts on the bed cage are outside the frame rails vs inside the frame rails for increased stability. The second reason is the shocks are mounted vertically with a motion ratio close to 1:1 allowing for proper dampening through the suspension travel. The cantilever suspension has a higher motion ratio resulting in smaller shocks, difficult to valve shocks properly, and heating up the shocks faster since they have less fluid. The Dirt King Prefab bed cage is your best choice to increase rear suspension performance while not breaking the bank.\u003c\/p\u003e\u003cp\u003e Specifications\u003cbr\u003e•\tRecommend Deaver H70HD Leaf Springs\u003cbr\u003e•\tRecommend Shocks: Fox or King (works with all shock manufactures)\u003cbr\u003e•\tRecommend Shock Length: 16\" (26\" collapsed, 42\" extended)\u003cbr\u003e- works with 14\" shocks with extended rod ends\u003cbr\u003e•\tRecommended Shock Diameter: 3.0\" (works with 2.5\"-3.0\" shocks)\u003cbr\u003e•\tBypass Tube Layout: Bypass tubes on front and back of shocks\u003cbr\u003e•\tBed cage Shock Mounting Width: 1.5\"\u003cbr\u003e•\tAxle Width: Requires 1.5\"-2\" wheel spacers or 1.5\"-2\" wider per side axle\u003cbr\u003e•\tAccessory Mounting Hole Size: 1\/2\"\u003c\/p\u003e\u003cp\u003e What's Included\u003cbr\u003e•\tPrefabbed bed cage structure\u003cbr\u003e•\tGrade 8 mounting hardware\u003cbr\u003e•\tLower shock mounts\u003cbr\u003e•\tInstallation instructions\u003c\/p\u003e\u003cp\u003e  Features\u003cbr\u003e•\tCAD designed \u003cbr\u003e•\tBoxed plate and tube construction\u003cbr\u003e•\t2\"x.120\" DOM tubing\u003cbr\u003e•\t1\/4\", 3\/16\", and 1\/8\" plate\u003cbr\u003e•\tProfessionally MIG welded\u003cbr\u003e•\tProudly made in the USA\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183489328,"sku":"DK-811828","price":1563.1,"currency_code":"USD","in_stock":true}]},{"product_id":"leaf-under-bump-stop-mount","title":"Leaf Under Bump Stop Mount","description":"\u003cp\u003eThe Dirt King bump stop kit is designed for maximum up travel and give the suspension another zone for dampening on harsh bottom outs. The mounts locate off of existing holes in the frame so there's no measuring required. Once the mounts are bolted in place the frame notch can be cut and then all the tabbing can be welded. The kit is designed to be paired with Deaver H70 or H70HD leaf under springs, Dirt King long travel spring under kit, and Dirt King bed cage. Intended for King 7\/8 threaded stem \u0026amp; Fox threaded stem 2.0 x 2.0 bump stops.\u003c\/p\u003e\u003cp\u003eIncludes\u003cbr\u003e• Bump Stop Mounts\u003cbr\u003e• Bump Stop Strike Pads\u003cbr\u003e• Grade 8 mounting hardware\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183522096,"sku":"DK-811843","price":440.02,"currency_code":"USD","in_stock":true}]},{"product_id":"long-travel-spring-under-kit","title":"Long Travel Spring Under Kit","description":"\u003cp\u003e Description\u003cbr\u003eThe long travel spring under kit was designed for maximum rear suspension performance without making the installation difficult for average person. For best results this kit should be combined with the Dirt King bedcage and Deaver H70HD leaf under springs. The complete package paired with a custom drive shaft allows for 18\" of usable travel. The factory drive shaft can be retained but will limit 2\" of down travel. Even with the 2\" travel loss it still achieves a respectable 16\" of wheel travel.\u003c\/p\u003e\u003cp\u003e Specifications\u003cbr\u003e•\tWheel Travel: 18\"\u003cbr\u003e•\tMaximum Tire Size: 35”\u003cbr\u003e•\tMaximum Backspacing: 4.75”\u003cbr\u003e•\tMinimum Rim Size: 16” \u003c\/p\u003e\u003cp\u003e What's Included\u003cbr\u003e•\tLong travel shackles\u003cbr\u003e•\tLeaf under u-bolt plates\u003cbr\u003e•\tLeaf under front hangers\u003cbr\u003e•\tRear shackle hangers\u003cbr\u003e•\t18\" quad wrapped limit straps\u003cbr\u003e•\tWeld on limit strap tabs\u003cbr\u003e•\tLeaf spring perches\u003cbr\u003e•\tDOT approved extended brake lines \u003cbr\u003e•\tGrade 8 mounting hardware\u003c\/p\u003e\u003cp\u003e  Features\u003cbr\u003e•\tBolt on application, minimal modifications required\u003cbr\u003e•\t3\/16\" and 1\/8” boxed plate construction\u003cbr\u003e•\tLimit strap tabbing\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183554864,"sku":"DK-811848","price":1371.02,"currency_code":"USD","in_stock":true}]},{"product_id":"rear-frame-plate-kit","title":"Rear Frame Plate Kit","description":"\u003cp\u003eThe Tacomas have c-channel frames from the cab back allowing the frame to twist and bend.  Our rear frame plate kit boxes in the frame dramatically increasing strength. The kit includes 1\/8\" thick plates to box in the entire rear section of the frame.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183587632,"sku":"DK-811851","price":289.1,"currency_code":"USD","in_stock":true}]},{"product_id":"shackle-hanger-kit","title":"Shackle \u0026 Hanger Kit","description":"\u003cp\u003eUpgrade your 2005-2023 Toyota Tacoma with the Dirt King heavy-duty shackle and hanger kit, designed to significantly improve geometry and strength. Constructed from high strength 3\/16\" and 1\/4\" steel, these shackles and hangers are engineered to resist deflection and bending, a common issue with stock shackle hangers. The redesigned mounting location and length of the shackle improves articulation and droop travel for superior off-road performance. When paired with Deaver U402 leaf springs, shock relocation towers, and 12\" shocks you can achieve 13\" of travel, a remarkable 30% improvement over the factory setup. This kit is compatible with all OEM replacement leaf springs. The hangers are easily installed using grade 8 mounting hardware. For those seeking even greater strength, an optional cross brace is available. This brace is compatible with the OEM spare tire \u0026amp; the factory tow hitch, although compatibility with certain aftermarket rear bumpers may vary.\u003c\/p\u003e\u003cp\u003eIncludes\u003c\/p\u003e\u003cp\u003e(2) Shackle Hangers\u003cbr\u003e(2) Shackles\u003cbr\u003eGrade 8 mounting hardware\u003cbr\u003e(Optional) Cross Brace\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183620400,"sku":"DK-811861","price":636.02,"currency_code":"USD","in_stock":true}]},{"product_id":"shackle-hanger-kit-add-cross-brace-200","title":"Shackle \u0026 Hanger Kit Add Cross Brace (+$200)","description":"\u003cp\u003eUpgrade your 2005-2023 Toyota Tacoma with the Dirt King heavy-duty shackle and hanger kit, designed to significantly improve geometry and strength. Constructed from high strength 3\/16\" and 1\/4\" steel, these shackles and hangers are engineered to resist deflection and bending, a common issue with stock shackle hangers. The redesigned mounting location and length of the shackle improves articulation and droop travel for superior off-road performance. When paired with Deaver U402 leaf springs, shock relocation towers, and 12\" shocks you can achieve 13\" of travel, a remarkable 30% improvement over the factory setup. This kit is compatible with all OEM replacement leaf springs. The hangers are easily installed using grade 8 mounting hardware. For those seeking even greater strength, an optional cross brace is available. This brace is compatible with the OEM spare tire \u0026amp; the factory tow hitch, although compatibility with certain aftermarket rear bumpers may vary.\u003c\/p\u003e\u003cp\u003eIncludes\u003c\/p\u003e\u003cp\u003e(2) Shackle Hangers\u003cbr\u003e(2) Shackles\u003cbr\u003eGrade 8 mounting hardware\u003cbr\u003e(Optional) Cross Brace\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183653168,"sku":"DK-811861 + DK-811861-B1100","price":832.02,"currency_code":"USD","in_stock":true}]},{"product_id":"shock-relocation-kit","title":"Shock Relocation Kit","description":"\u003cp\u003e\u003cbr\u003e Description\u003cbr\u003eIntroducing the Dirt King Rear Shock Relocation Kit for the 2005-2023 Tacoma. This kit is engineered to maximize rear suspension travel by increasing shock stroke by 50%. Shocks mounted in the factory location typically measure 2.5\" x 8\",  the Dirt King relocation kit is designed to accommodate for 2.5\" x 12\" shocks. This allows for significantly improved vehicle articulation, increasing down travel without sacrificing up travel. The kit comes complete with 3\/16\" lower shock tabs and all the necessary hardware for a straightforward installation. For optimal performance, we recommend pairing this kit with aftermarket leaf springs and the Dirt King Shackle and Hanger Kit to fully unleash your vehicle’s potential.\u003c\/p\u003e\u003cp\u003e Specifications\u003cbr\u003e•\tAmount of Lift: 0-3” (based off leaf spring spec)\u003cbr\u003e•\tTrack Width: Requires 1.5\" wheel spacers\u003cbr\u003e•\tMaximum Backspacing: 4.5\"\u003c\/p\u003e\u003cp\u003e What's Included\u003cbr\u003e•\tRear shock mounts\u003cbr\u003e•\tShock tabs\u003cbr\u003e•\tShock tab gussets\u003cbr\u003e•\tLow profile wrench\u003cbr\u003e•\tReservoir mounts\u003cbr\u003e•\tGrade 8 mounting hardware\u003cbr\u003e•\tDirt King sticker pack\u003cbr\u003e•\tInstallation Instructions\u003c\/p\u003e\u003cp\u003e  Features\u003cbr\u003e•\tCAD designed\u003cbr\u003e•\tProfessionally MIG welded\u003cbr\u003e•\tProudly made in the USA \u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183685936,"sku":"DK-811864","price":734.02,"currency_code":"USD","in_stock":true}]},{"product_id":"performance-spindles","title":"Performance Spindles","description":"\u003cp\u003eDescription \u003cbr\u003eIntroducing the Dirt King Performance Spindles, engineered to withstand extreme abuse! These fabricated spindles feature an innovative one-piece snout block with integrated brake caliper tabs, all precision machined from a single block of steel for unmatched strength and reliability. Designed to seamlessly integrate with our long-travel kits, performance lower control arms, and OEM lower control arms, these spindles maintain factory geometry while significantly enhancing durability.\u003cbr\u003eCompatible with both 4WD and 2WD models, these spindles are ideal for those looking to eliminate the front sway-bar, improving articulation and off-road performance. For enthusiasts planning to upgrade tire sizes, we recommend using a zero-offset wheel to ensure optimal clearance, though stock wheels and tires fit perfectly.\u003c\/p\u003e\u003cp\u003e Specifications\u003cbr\u003e•\tAmount of Lift: 0”\u003cbr\u003e•\tTrack Width: Stock\u003cbr\u003e•\tMaximum Backspacing: 5”\u003cbr\u003e•\tMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003e What's Included\u003cbr\u003e•\tPerformance spindles\u003cbr\u003e•\tInstallation instructions\u003c\/p\u003e\u003cp\u003e  Features\u003cbr\u003e•\tDirect bolt on application \u003cbr\u003e•\tCAD designed\u003cbr\u003e•\tProfessionally MIG welded\u003cbr\u003e•\tProudly made in the USA \u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183718704,"sku":"DK-811905","price":1857.1,"currency_code":"USD","in_stock":true}]},{"product_id":"long-travel-kit-with-bushing-upper-arms-7","title":"Long Travel Kit with Bushing Upper Arms","description":"\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e 4WD requires DK-811948\u003c\/p\u003e\u003cp\u003e Description\u003cbr\u003eThe Dirt King long travel kit was developed to drastically improve the vehicles off-road handling without compromising its day to day driving characteristics. This suspension system allows for 13.5” of travel and accepts up to a 35” tire. The kit is compatible with 2WD models and 4WD models along with the purchase of extended axle shafts. Our upper and lower arms are designed with 1” stainless steel uniballs for the outer pivots instead of ball joints for strength and increased articulation. Compared to the competition we’ve gained several inches of ground clearance by mounting the lower arms in the factory location instead of below it. This kit is CAD designed, thoroughly tested, and 100% made in America resulting in a product we’re proud to put our name on!\u003c\/p\u003e\u003cp\u003e Specifications\u003cbr\u003e•\tWheel Travel: 13.5”\u003cbr\u003e•\tAmount of Lift: 0-4”\u003cbr\u003e•\tTrack Width: 3.5” wider per side\u003cbr\u003e•\tMaximum Tire Size: 35”\u003cbr\u003e•\tMaximum Backspacing: 4.75”\u003cbr\u003e•\tMinimum Rim Size: 16”\u003cbr\u003e•\tCoil over Shock Size: 2.5” x 8” \u003cbr\u003e•\tBypass Shock Size: 2.5” x 8” \u003cbr\u003e•\tBump Stop Size: 2.0” x 2.0”\u003cbr\u003e________________________________________\u003cbr\u003e4WD\u003cbr\u003eTo achieve the full amount of travel on 4WD models you must install the 1” diff drop kit and machine the inner CV’s for more articulation. We offer several services for machining CV’s and complete axle assembly.\u003cbr\u003e________________________________________\u003cbr\u003eShocks\u003cbr\u003eFor the best performance and to achieve the full amount of travel you must purchase our spec built shocks or have them custom built based on our coil over spec sheet. You may also use Tacoma OEM replacement coil overs (King, Fox, Icon) with 600lb springs and 1.5” wide lower eyelet spacers with ½” mounting holes. These shocks will work but limit the amount of wheel travel. The OEM replacement coil overs include reservoir mounts that may not be compatible with our double shear kit option. Our long travel kit is also tabbed to accommodate bypass shocks.  The bypass shocks will allow for superior suspension dampening and tunability. To mount the bypasses we offer a weld on bypass shock hoop kit (DK-811910) that can be purchased separately. The bypass shock hoop kit requires welding and modifications to the frame. For extreme off-roading the kit has the ability to accept bump stops along with the coil overs and bypasses. The use of bump stops will alsorequire welding and modifications to the frame.\u003cbr\u003e________________________________________\u003cbr\u003eWheel Travel\u003cbr\u003eWhen shopping long travel kits many consumers tend to focus just on travel numbers. This is the reason many companies claim inaccurate numbers or don’t disclose the amount of work involved to achieve these numbers. Our goal is to build a suspension system with the highest amount of wheel travel without requiring major modifications to the vehicle or compromising its overall drivability.\u003cbr\u003e________________________________________\u003cbr\u003eTire Info\u003cbr\u003eWhen using 35” tires with this kit modifications to the wheel well will need to be made. The firewall pinch weld will need to be folded over and front cab mount needs to be shaved to avoid contact while turning. The upper wheel well will also need to be modified to avoid contact at full bump.   \u003c\/p\u003e\u003cp\u003e What's Included\u003cbr\u003e•\tBoxed plate upper control arms\u003cbr\u003e•\tBoxed plate lower control arms\u003cbr\u003e•\t8\" quad wrapped limit straps\u003cbr\u003e•\tWeld on adjustable limit strap mounts\u003cbr\u003e•\t17-4 stainless steel misalignment spacers\u003cbr\u003e•\t17-4 stainless steel tie rod extensions\u003cbr\u003e•\tDOT approved extended brake lines \u003cbr\u003e•\tGrade 8 mounting hardware\u003cbr\u003e•\tZinc plated bushing washers \u003cbr\u003e•\tBump stop spacers\u003c\/p\u003e\u003cp\u003e  Features\u003cbr\u003e•\tBolt on application, minimal modifications required\u003cbr\u003e•\tUtilizes Probearing bearings\u003cbr\u003e•\t4130 chromoly uniball cups\u003cbr\u003e•\tChoice of  ¾” heims or poly bushings for the UCA’s\u003cbr\u003e•\tDelrin bushings for the LCA’s\u003cbr\u003e•\tZinc plated inner bushing sleeves\u003cbr\u003e•\tGrease fittings for easy servicing             \u003cbr\u003e•\t3\/16\" and 1\/8” boxed plate construction\u003cbr\u003e•\tInternally ribbed with extrusions for weight reduction\u003cbr\u003e•\tBump stop plating\u003cbr\u003e•\tLimit strap tabbing\u003cbr\u003e•\tBypass Tabbing\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787183751472,"sku":"DK-811908-B","price":3429.02,"currency_code":"USD","in_stock":true}]},{"product_id":"long-travel-kit-with-heim-upper-arms-6","title":"Long Travel Kit with Heim Upper Arms","description":"\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e 4WD requires DK-811948\u003c\/p\u003e\u003cp\u003e Description\u003cbr\u003eThe Dirt King long travel kit was developed to drastically improve the vehicles off-road handling without compromising its day to day driving characteristics. This suspension system allows for 13.5” of travel and accepts up to a 35” tire. The kit is compatible with 2WD models and 4WD models along with the purchase of extended axle shafts. Our upper and lower arms are designed with 1” stainless steel uniballs for the outer pivots instead of ball joints for strength and increased articulation. Compared to the competition we’ve gained several inches of ground clearance by mounting the lower arms in the factory location instead of below it. This kit is CAD designed, thoroughly tested, and 100% made in America resulting in a product we’re proud to put our name on!\u003c\/p\u003e\u003cp\u003e Specifications\u003cbr\u003e•\tWheel Travel: 13.5”\u003cbr\u003e•\tAmount of Lift: 0-4”\u003cbr\u003e•\tTrack Width: 3.5” wider per side\u003cbr\u003e•\tMaximum Tire Size: 35”\u003cbr\u003e•\tMaximum Backspacing: 4.75”\u003cbr\u003e•\tMinimum Rim Size: 16”\u003cbr\u003e•\tCoil over Shock Size: 2.5” x 8” \u003cbr\u003e•\tBypass Shock Size: 2.5” x 8” \u003cbr\u003e•\tBump Stop Size: 2.0” x 2.0”\u003cbr\u003e________________________________________\u003cbr\u003e4WD\u003cbr\u003eTo achieve the full amount of travel on 4WD models you must install the 1” diff drop kit and machine the inner CV’s for more articulation. We offer several services for machining CV’s and complete axle assembly.\u003cbr\u003e________________________________________\u003cbr\u003eShocks\u003cbr\u003eFor the best performance and to achieve the full amount of travel you must purchase our spec built shocks or have them custom built based on our coil over spec sheet. You may also use Tacoma OEM replacement coil overs (King, Fox, Icon) with 600lb springs and 1.5” wide lower eyelet spacers with ½” mounting holes. These shocks will work but limit the amount of wheel travel. The OEM replacement coil overs include reservoir mounts that may not be compatible with our double shear kit option. Our long travel kit is also tabbed to accommodate bypass shocks.  The bypass shocks will allow for superior suspension dampening and tunability. To mount the bypasses we offer a weld on bypass shock hoop kit (DK-811910) that can be purchased separately. The bypass shock hoop kit requires welding and modifications to the frame. For extreme off-roading the kit has the ability to accept bump stops along with the coil overs and bypasses. The use of bump stops will alsorequire welding and modifications to the frame.\u003cbr\u003e________________________________________\u003cbr\u003eWheel Travel\u003cbr\u003eWhen shopping long travel kits many consumers tend to focus just on travel numbers. This is the reason many companies claim inaccurate numbers or don’t disclose the amount of work involved to achieve these numbers. Our goal is to build a suspension system with the highest amount of wheel travel without requiring major modifications to the vehicle or compromising its overall drivability.\u003cbr\u003e________________________________________\u003cbr\u003eTire Info\u003cbr\u003eWhen using 35” tires with this kit modifications to the wheel well will need to be made. The firewall pinch weld will need to be folded over and front cab mount needs to be shaved to avoid contact while turning. The upper wheel well will also need to be modified to avoid contact at full bump.   \u003c\/p\u003e\u003cp\u003e What's Included\u003cbr\u003e•\tBoxed plate upper control arms\u003cbr\u003e•\tBoxed plate lower control arms\u003cbr\u003e•\t8\" quad wrapped limit straps\u003cbr\u003e•\tWeld on adjustable limit strap mounts\u003cbr\u003e•\t17-4 stainless steel misalignment spacers\u003cbr\u003e•\t17-4 stainless steel tie rod extensions\u003cbr\u003e•\tDOT approved extended brake lines \u003cbr\u003e•\tGrade 8 mounting hardware\u003cbr\u003e•\tZinc plated bushing washers \u003cbr\u003e•\tBump stop spacers\u003c\/p\u003e\u003cp\u003e  Features\u003cbr\u003e•\tBolt on application, minimal modifications required\u003cbr\u003e•\tUtilizes Probearing bearings\u003cbr\u003e•\t4130 chromoly uniball cups\u003cbr\u003e•\tChoice of  ¾” heims or poly bushings for the UCA’s\u003cbr\u003e•\tDelrin bushings for the LCA’s\u003cbr\u003e•\tZinc plated inner bushing sleeves\u003cbr\u003e•\tGrease fittings for easy servicing             \u003cbr\u003e•\t3\/16\" and 1\/8” boxed plate construction\u003cbr\u003e•\tInternally ribbed with extrusions for weight reduction\u003cbr\u003e•\tBump stop plating\u003cbr\u003e•\tLimit strap tabbing\u003cbr\u003e•\tBypass Tabbing\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787184537904,"sku":"DK-811908-H","price":3723.02,"currency_code":"USD","in_stock":true}]},{"product_id":"uca-spindle-adapter-4","title":"UCA Spindle Adapter","description":"\u003cp\u003eThis spacer adapts 1\" uniballs (WSSX16T) to the factory spindles. The spacers are machined from 17-4 stainless steel and have a precision fit taper to mate to the factory spindle. This product will not work with aftermarket spindles.\u003c\/p\u003e\u003cp\u003e*These spacers were developed and intended to be used with Dirt King Fabrication suspension systems. If you plan to use this product for another manufacturers suspension or a custom application then use at your own risk.\u003c\/p\u003e\u003cp\u003eSold individually.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787184570672,"sku":"DK-811918","price":29.4,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-black-anodize-black-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Black Anodize - Black Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787184603440,"sku":"DK-811923A-BK","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-black-anodize-blue-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Black Anodize - Blue Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185094960,"sku":"DK-811923A-BL","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-black-anodize-bronze-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Black Anodize - Bronze Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185127728,"sku":"DK-811923A-BZ","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-black-anodize-clear-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Black Anodize - Clear Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185160496,"sku":"DK-811923A-CL","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-black-anodize-gold-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Black Anodize - Gold Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185193264,"sku":"DK-811923A-GD","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-black-anodize-orange-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Black Anodize - Orange Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185226032,"sku":"DK-811923A-OR","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-black-anodize-purple-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Black Anodize - Purple Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185258800,"sku":"DK-811923A-PR","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-black-anodize-red-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Black Anodize - Red Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185291568,"sku":"DK-811923A-RD","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-black-anodize-black-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Black Anodize - Black Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185324336,"sku":"DK-811923B-BK","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-black-anodize-blue-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Black Anodize - Blue Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185357104,"sku":"DK-811923B-BL","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-black-anodize-bronze-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Black Anodize - Bronze Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185389872,"sku":"DK-811923B-BZ","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-black-anodize-clear-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Black Anodize - Clear Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185422640,"sku":"DK-811923B-CL","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-black-anodize-gold-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Black Anodize - Gold Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185455408,"sku":"DK-811923B-GD","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-black-anodize-orange-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Black Anodize - Orange Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185488176,"sku":"DK-811923B-OR","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-black-anodize-purple-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Black Anodize - Purple Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185553712,"sku":"DK-811923B-PR","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-black-anodize-red-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Black Anodize - Red Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185586480,"sku":"DK-811923B-RD","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-clear-anodize-black-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Clear Anodize - Black Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787185619248,"sku":"DK-811923C-BK","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-clear-anodize-blue-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Clear Anodize - Blue Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787186241840,"sku":"DK-811923C-BL","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-clear-anodize-bronze-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Clear Anodize - Bronze Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787186274608,"sku":"DK-811923C-BZ","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-clear-anodize-clear-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Clear Anodize - Clear Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787186897200,"sku":"DK-811923C-CL","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-clear-anodize-gold-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Clear Anodize - Gold Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187224880,"sku":"DK-811923C-GD","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-clear-anodize-orange-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Clear Anodize - Orange Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187257648,"sku":"DK-811923C-OR","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-clear-anodize-purple-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Clear Anodize - Purple Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187290416,"sku":"DK-811923C-PR","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-3-4-rod-ends-clear-anodize-red-caps-badges","title":"Billet Upper Control Arms - 3\/4\" Rod Ends - Clear Anodize - Red Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187323184,"sku":"DK-811923C-RD","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-clear-anodize-black-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Clear Anodize - Black Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187355952,"sku":"DK-811923D-BK","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-clear-anodize-blue-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Clear Anodize - Blue Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187388720,"sku":"DK-811923D-BL","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-clear-anodize-bronze-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Clear Anodize - Bronze Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187421488,"sku":"DK-811923D-BZ","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-clear-anodize-clear-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Clear Anodize - Clear Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187454256,"sku":"DK-811923D-CL","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-clear-anodize-gold-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Clear Anodize - Gold Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187487024,"sku":"DK-811923D-GD","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-clear-anodize-orange-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Clear Anodize - Orange Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187519792,"sku":"DK-811923D-OR","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-clear-anodize-purple-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Clear Anodize - Purple Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187749168,"sku":"DK-811923D-PR","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"billet-upper-control-arms-silentspin-bushings-clear-anodize-red-caps-badges-6","title":"Billet Upper Control Arms - SilentSpin Bushings - Clear Anodize - Red Caps \u0026 Badges","description":"\u003cp\u003eDescription\u003c\/p\u003e\u003cp\u003eThe Dirt King Billet Upper Control Arms are precision-machined from 6061 aluminum, offering exceptional strength and a refined appearance. Designed to optimize suspension geometry, these arms allow for increased front lift and suspension travel when paired with Dirt King shocks. Factory control arms often compromise geometry and structural integrity due to excessive articulation at stock joints, but Dirt King arms solve this with improved caster settings and re-engineered pivot angles for better handling and articulation.\u003c\/p\u003e\u003cp\u003eA key feature of the billet arms is the adjustable inner pivot system, available in two configurations. The maintenance-free Probearing SilentSpin bushings provide superior ride comfort, with a polyurethane outer layer that dampens road noise and a self-lubricating composite core for smooth, quiet operation. We recommend the bushings for optimal on-road and off-road performance, delivering excellent handling with no compromises. Alternatively, the traditional ¾” chromoly rod ends offer a firmer, performance-driven connection for those prioritizing responsiveness and control in demanding off-road conditions. The rod ends also feature threaded adjustment sleeves, allowing precise camber and caster adjustments while the arms remain installed.\u003c\/p\u003e\u003cp\u003eBoth configurations are equipped with heavy-duty Probearing ball joints for long-lasting durability in harsh environments. These billet upper control arms are built for lasting performance and easy installation, making them an excellent upgrade for any vehicle.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;Specifications\u003cbr\u003eAmount of Lift: Allows for 0-3” of lift\u003cbr\u003eTrack Width: Stock\u003cbr\u003eMaximum Backspacing: 4.75”\u003cbr\u003eMinimum Rim Size: 16”\u003c\/p\u003e\u003cp\u003eControl Arm Material: 6061 aluminum\u003cbr\u003eBushing Option: Probearing SilentSpin (maintenance-free, self-lubricating)\u003cbr\u003eRod End Option: Probearing ¾” chromoly with adjustment sleeve\u003cbr\u003eBall Joints: Heavy-duty Probearing\u003cbr\u003eCamber\/Caster Adjustability: Yes\u003cbr\u003eRebuildable: Yes (all components are fully rebuildable or replaceable)\u003cbr\u003eWarranty: Limited lifetime warranty on arms, 1-year warranty on ball joints and bushings\/rod ends\u003c\/p\u003e\u003cp\u003eWheel Travel \/ Lift\u003cbr\u003eThe Dirt King upper control arms must be paired with aftermarket coilover shocks to lift the vehicle. The Dirt King arms offer maximum down travel compared to the stock upper control arms. These arms are compatible with Dirt King, King, Fox, Bilstein, ADS and Icon coilovers. Do not install these upper control arms with coil spacers paired with extended length aftermarket shocks.\u003c\/p\u003e\u003cp\u003e\u0026amp;nbsp;What's Included\u003cbr\u003e2 Billet upper control arms (left and right)\u003cbr\u003eHeavy-duty Probearing ball joints (pre-installed)\u003cbr\u003eProbearing SilentSpin bushings or ¾” rod ends (based on configuration)\u003cbr\u003eAdjustment sleeve for camber and caster (rod end option)\u003cbr\u003eInstallation hardware\u003cbr\u003eDetailed installation instructions\u003cbr\u003e\u0026amp;nbsp; Features\u003cbr\u003eCAD designed\u0026amp;nbsp;\u003c\/p\u003e\u003cp\u003ePrecision-machined from 6061 aluminum for strength and durability\u003cbr\u003eImproved caster settings for enhanced handling\u003cbr\u003eRe-engineered pivot angles for increased articulation\u003cbr\u003eAdjustable inner pivot system for camber and caster adjustments\u003cbr\u003eMaintenance-free SilentSpin bushings for smooth, quiet operation\u003cbr\u003eOptional ¾” chromoly rod ends for firm, performance-driven handling\u003cbr\u003eHeavy-duty Probearing ball joints for long-lasting durability\u003cbr\u003eFully rebuildable and replaceable components for easy maintenance\u003cbr\u003eCompatible with Dirt King shocks for increased lift and suspension travel\u003cbr\u003e\u0026amp;nbsp; Compatibility\u003c\/p\u003e\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003e*This product is designed to pair with OEM and Dirt King parts. Compatibility with other brands must be approved by the respective manufacturer.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187781936,"sku":"DK-811923D-RD","price":1420.02,"currency_code":"USD","in_stock":true}]},{"product_id":"upper-arm-spacer-kit-7","title":"Upper Arm Spacer Kit","description":"\u003cp\u003eThe spacer kit adapts 1\" uniballs (WSSX16T) to the factory spindles. The spacers are machined from 17-4 stainless steel and have a precision fit taper to mate to the factory spindle. This product will not work with aftermarket spindles.\u003c\/p\u003e\u003cp\u003e*This spacer kit was developed and intended to be used with Dirt King Fabrication suspension systems. If you plan to use this product for another manufacturers suspension or a custom application then use at your own risk.\u003c\/p\u003e\u003cp\u003eIncludes\u003cbr\u003e(2) 9\/16” Half Moon Misalignment Spacers\u003cbr\u003e(2) 9\/16” Tapered Misalignment Spacers\u003cbr\u003e(2) Custom Machined Grade 8 Bolts and Hardware\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187814704,"sku":"DK-811925","price":111.72,"currency_code":"USD","in_stock":true}]},{"product_id":"2-long-travel-kit","title":"'+2\" Long Travel Kit","description":"\u003cp\u003eDescription\u003cbr\u003eExperience the best of both worlds with the Dirt King +2 long travel kit—enhanced off-road performance without compromising day-to-day comfort. This kit adds 2” of width per side, allowing for more than a 25% increase in suspension travel while still being compatible with stock fenders when paired with a zero or positive offset wheel and 33” tires. For a more aggressive look, zero or negative offset wheels and 35” tires can be used in combination with flared fenders.\u003cbr\u003eThis suspension system extends the wheelbase, allowing for proper fitment of 35” tires. Our design philosophy focused on creating a durable, low-maintenance system. To achieve this, we chose the new greaseless SilentSpin bushings for the upper control arms and Delrin bushings infused with PTFE for smooth operation on the lower control arms. Heavy-duty Moog ball joints ensure reliability at the outer pivots, and replaceable aluminum skid plates protect the lower arms on rough trails.\u003cbr\u003eAll essential mounting hardware is provided, and the kit supports multiple installation setups, whether you opt for coilovers only, coilovers with bypasses, or coilovers with bump stops. To accommodate the bump stops, the control arms feature an aluminum strike pad mounted to the bypass tabs, engaging at the optimal point throughout the suspension cycle.\u003cbr\u003eWhat does all of this mean? The Dirt King +2” long travel kit will equip your truck for exciting adventures on trails and in the desert. Contact our knowledgeable sales team for any questions or assistance in putting together a complete parts list to achieve your dream build.\u003c\/p\u003e\u003cp\u003e Specifications\u003cbr\u003e•\tWheel Travel: Up to 25% increased wheel travel\u003cbr\u003e•\tAmount of Lift: 0-3.5”\u003cbr\u003e•\tTrack Width: 2” wider per side\u003cbr\u003e•\tMaximum Tire Size: 35”\u003cbr\u003e•\tMaximum Backspacing: 4.75”\u003cbr\u003e•\tMinimum Rim Size: 16”\u003cbr\u003e•\tCoilover Shock Size: Dirt King Spec Coilovers\u003cbr\u003e•\tBypass Shock Size: Dirt King Spec Bypasses\u003cbr\u003e•\tBump Stop Size: 2.0” x 2.0”\u003cbr\u003e________________________________________\u003cbr\u003e4WD\u003cbr\u003eTo achieve the full amount of travel on 4WD models you must install the 1” diff drop kit and machine the inner CV’s for more articulation. We offer several services for machining CV’s and complete axle assembly.\u003cbr\u003e________________________________________\u003cbr\u003eShocks\u003cbr\u003eFor the best performance and to achieve the full amount of travel you must purchase our spec built shocks or have them custom built based on our coil over spec sheet. You may also use Tacoma OEM replacement coil overs (Dirt King, King, Fox, Icon) with 1.5” wide lower eyelet spacers with ½” mounting holes, to achieve desired ride height you may need to increase preload or go to a higher spring rate. For the OEM replacement coil overs to achieve proper collapse length you will want to run a 3\/8\" spacer. These shocks will work but limit the amount of wheel travel. The OEM replacement coil overs include reservoir mounts that may not be compatible with our double shear kit option. Our long travel kit is also tabbed to accommodate bypass shocks.  The bypass shocks will allow for superior suspension dampening and tunability. To mount the bypasses we offer a weld on bypass shock hoop kit (DK-811710) that can be purchased separately. The bypass shock hoop kit requires welding and modifications to the frame. For extreme off-roading the kit has the ability to accept bump stops or bypass along with the coil overs. The use of bump stops will also require welding and modifications to the frame.\u003c\/p\u003e\u003cp\u003e What's Included\u003cbr\u003e•\tBoxed plate upper control arms\u003cbr\u003e•\tBoxed plate lower control arms\u003cbr\u003e•\t8\" quad wrapped limit straps\u003cbr\u003e•\tWeld on adjustable limit strap mounts\u003cbr\u003e•\t17-4 stainless steel tie rod extensions\u003cbr\u003e•\tDOT approved extended brake lines\u003cbr\u003e•\tGrade 8 mounting hardware\u003cbr\u003e•\tBillet aluminum bump stop strike pad\u003cbr\u003e•\tZinc plated bushing washers\u003cbr\u003e•\tInstallation instructions\u003c\/p\u003e\u003cp\u003e  Features\u003cbr\u003e•\t2” Wider Per Side: Adds 2” of width per side, boosting suspension travel by 25%.\u003cbr\u003e•\tStock Fender Compatibility: Works with stock fenders when using positive offset wheels.\u003cbr\u003e•\tAggressive Look Option: Supports zero or negative offset wheels with flared fenders.\u003cbr\u003e•\tExtended Wheelbase: Allows proper fitment of 35” tires.\u003cbr\u003e•\tSilentSpin Bushings: Greaseless bushings in upper control arms for low maintenance.\u003cbr\u003e•\tDelrin Bushings with PTFE: Smooth operation in lower control arms with PTFE-infused Delrin.\u003cbr\u003e•\tHeavy-Duty Moog Ball Joints: Reliable outer pivots with heavy-duty Moog ball joints.\u003cbr\u003e•\tAluminum Skid Plates: Replaceable skid plates protect lower arms on rough trails.\u003cbr\u003e•\tFlexible Installation: Compatible with coilovers, coilovers with bypasses, or coilovers with bump stops.\u003cbr\u003e•\tAluminum Strike Pads: Designed for optimal bump stop engagement.\u003cbr\u003e•\tComplete Hardware Included: Comes with all necessary mounting hardware.\u003cbr\u003e•\tMade in the USA: Proudly designed and manufactured in the United States.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187847472,"sku":"DK-811928","price":3429.02,"currency_code":"USD","in_stock":true}]},{"product_id":"lca-spindle-adapter-5","title":"LCA Spindle Adapter","description":"\u003cp\u003eThis spacer adapts 1\" uniballs (WSSX16T) to the factory spindles. The spacers are machined from 17-4 stainless steel and have a precision fit taper to mate to the factory spindle. This product will not work with aftermarket spindles.\u003c\/p\u003e\u003cp\u003e*These spacers were developed and intended to be used with Dirt King Fabrication suspension systems. If you plan to use this product for another manufacturers suspension or a custom application then use at your own risk.\u003c\/p\u003e\u003cp\u003eSold individually.\u003c\/p\u003e","brand":"Dirt King Fabrication","offers":[{"title":"Default Title","offer_id":67787187880240,"sku":"DK-811929","price":29.4,"currency_code":"USD","in_stock":true}]}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0997\/6987\/6784\/collections\/Toyota_trucks_copy.webp?v=1789363324","url":"https:\/\/deserttherapyoffroad.com\/collections\/toyota-products.oembed?page=2","provider":"DT Offroad ","version":"1.0","type":"link"}